1. Open the cover of the memory card slot.
2. Insert the card into the memory card slot with the contact surface facing up, and
press until it locks into place.
3. Close the cover of the memory card slot.
Remove the microSD card
Important: Do not remove the memory card in the middle of an operation when
the card is being accessed. Removing the card in the middle of an operation may damage
the memory card as well as the device, and data stored on the card may be corrupted.
You can remove or replace the memory card during phone operation without switching
the device off.
1. Ensure that no application is currently accessing the memory card.
2. Open the cover of the memory card slot.
3. Press the memory card slightly in to release the lock, and remove it.
4. Close the cover of the memory card slot.
Charge the battery
Your battery has been precharged, but the charging levels may vary.
1. Connect the charger to a wall outlet.
2. Connect the charger to the device. You can use your device while it is
charging.
3. When the battery is fully charged, disconnect the charger from the
device, then from the wall outlet.
If the battery is completely discharged, it may take several minutes before
the charging indicator appears on the display or before any calls can be made.
Antenna
Your device may have internal and external antennas. As with any radio
transmitting device, avoid touching the antenna area unnecessarily while the
antenna is transmitting or receiving. Contact with such an antenna affects the
communication quality and may cause the device to operate at a higher power
level than otherwise needed and may reduce the battery life.
Get started
© 2008 Nokia. All rights reserved.
10