Nokia 6110 Navigator

Page 74
background image
74
Default profile
 — to select the profile you want to activate each time you connect 
the enhancement to your device
Automatic answer
 — to set the device to answer an incoming call automatically 
after 5 seconds when this enhancement is connected to your device. If the 
Ringing 
type
 is set to 
Beep once
 or 
Silent
, automatic answer cannot be used, and you must 
answer the call manually.
Lights
 — to set the device lights continuously on while using the enhancement, 
select 
On
. 
Security
Select 
Phone and SIM card
, 
Certificate management
, or 
Security module
.
Phone and SIM card
You can change the following codes: lock code, PIN or UPIN code, and PIN2 code. 
These codes can only include the numbers from 0 to 9. 
Avoid using access codes similar to emergency numbers to prevent accidental 
dialing of the emergency number.
Code in use
— to select the active code, 
PIN
 or 
UPIN
, for the active USIM. This is 
shown only if the active USIM supports UPIN, and the UPIN is not rejected.
PIN code request
 or 
UPIN code request
— to set the device to request the code 
each time the device is switched on. Some SIM cards may not allow the PIN code 
request to be turned 
Off
. If you select 
Code in use
> 
UPIN
, 
UPIN code request
 is 
shown instead.
PIN code
 or 
UPIN code
, 
PIN2 code
, and 
Lock code
— to change the codes
Keypad autolock period
> 
User defined
 — to automatically lock the keypad after a 
defined period of inactivity
Phone autolock period
— to set a time-out after which the device is automatically 
locked. To use the device again, you need to enter the correct lock code. To turn off 
the autolock period, select 
None
.
Lock if SIM card changed
— to set the device to prompt for the lock code when an 
unknown, new SIM card is inserted into your device. The device keeps a list of SIM 
cards that are recognized as the owner cards.
Closed user group
 (network service) — to specify a group of people whom you can 
call and who can call you. For more information, contact your service provider. To 
activate the default group agreed on with the service provider, select 
Default
. If 
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109