Nokia 6710 Navigator

Page 10
background image
2. Place the card
in the slot with
the contact
area facing
down (2).
3. Push the card
gently to lock it
into place.
Close the slot
cover (3).
Remove a memory card
Important:  Do not remove the memory card during
an operation when the card is being accessed. Doing so may
damage the memory card and the device, and corrupt data
stored on the card.
1. Press the power key briefly, and select Remove memory
card > Yes.
2. Open the memory card slot cover.
3. Press the memory card gently to release it.
4. Pull the card out, and press OK.
5. Close the slot cover.
Charge the battery
Your battery has been partially charged at the factory. If the
device indicates a low charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the
charger to the
device.
3. When the
device
indicates a full
charge,
disconnect the
charger from
the device,
then from the
wall outlet.
You can also charge the battery with a USB data cable
connected to a compatible computer.
1. Connect the USB data cable to a USB port of a computer
and to your device.
2. When the battery is fully charged, disconnect the USB data
cable.
USB charging efficiency varies significantly. In some cases, it
may take a very long time for charging to start and the device
to start functioning. You do not need to charge the battery
for a specific length of time, and you can use the device while
it is charging. If the battery is completely discharged, it may
take several minutes before the charging indicator appears
on the display or before any calls can be made.
Get started
© 2009 Nokia. All rights reserved.
10