Nokia Extra Power DC-11K

Page 3
background image
ENGLISH
Before you can use the DC-11 device 
to charge the battery in a compatible 
device, you must charge the DC-11 
device.
Charge the DC-11 device
Before charging the DC-11 device, 
carefully read "Battery and charger 
information".
Warning: Use only chargers 
approved by Nokia for use 
with this particular model. 
The use of any other types may invalidate 
any approval or warranty, and may be 
dangerous.
When you disconnect the power cord of 
any accessory, grasp and pull the plug, 
not the cord.
1. Connect a compatible charger to 
a power source.
2. Connect the charger cable to the 
charger connector on the DC-11 
device. The device switches on.
The indicator light flashes during 
charging. If the light is not 
displayed, check that the charger is 
properly connected to the DC-11 
device.
3. When the DC-11 device is fully 
charged, the indicator light stops 
flashing. Disconnect the charger 
from the DC-11 device, then from 
the power source.
The DC-11 device can also be charged 
through a USB port of a compatible PC 
using the Nokia connectivity cable 
CA-100 or CA-126 (sold separately). 
Connect one end of the cable to the 
charger connector on the DC-11 
device and the other end to a USB port 
on the PC.
While charging the DC-11 device, you 
can use it to charge the battery in one 
or two devices. Connect the device or 
devices to the DC-11 device.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7