2 Connect the charger cable to the charger connector on the headset. The red
indicator light turns green when the battery is fully charged. Charging the battery
fully may take up to 2 hours.
3 Disconnect the charger from the headset, then unplug from the wall outlet.
The fully charged battery has power for up to 6 hours of talk time or up to 120 hours
of standby time.
When the battery charge is low, you hear a voice prompt, the headset beeps every 5
minutes, and the red indicator light flashes. When the battery is charging, the red
indicator light is on.
Check the battery charge
Make sure the headset is switched on, then press . A green light indicates a
sufficient charge level. If the light is yellow, you may need to recharge the battery
soon. If the light is red, recharge the battery.
Switch the headset on or off
Switch on
Press and hold for 2 seconds. The headset beeps, and a green indicator light
flashes once.
The headset connects to the last connected phone or other device. If you have never
paired the headset, or you have cleared the pairings, the headset switches to pairing
mode.
Switch off
Press and hold for 5 seconds. The headset beeps, and a red indicator light flashes
once.
If not connected to a phone within 30 minutes, the headset switches off.
Pair and connect the headset to your phone
Before using the headset, you must pair and connect it to a compatible phone.
1 Switch the headset off.
2 Switch your phone on.
3 If you have never paired the headset, or you have cleared the pairings, switch the
headset on.
If you have previously paired your headset with a device, press and hold for 5
seconds.
5