Nokia Mono Bluetooth Headset BH-217

Page 12
background image
ENGLISH
and press and hold the multifunction 
key again for about 2 seconds.
When you activate the prompts, the 
green indicator light flashes once. 
When you deactivate the prompts, the 
yellow light flashes once. In both 
cases, there is also an audible 
notification.
Clear pairings
To clear the pairings from the headset, 
switch off the headset, and press and 
hold the multifunction key for about 8 
seconds. The headset beeps twice, the 
red and green indicator lights 
alternate, and the headset enters 
pairing mode.
Troubleshooting
If you cannot connect the headset to 
your compatible device, make sure the 
headset is charged, switched on, and 
paired with the device.
Battery and charger information
This device has an internal, 
nonremovable, rechargeable battery. Do 
not attempt to remove the battery from 
the device as you may damage the 
device. This device is intended for use 
when supplied with power from the 
following chargers: AC-3, AC-4, AC-5, 
AC-8, DC-4 and DC-9. The exact charger 
model number may vary depending on 
the type of plug. The plug variant is 
identified by one of the following: E, X, 
AR, U, A, C, K, or B. The battery can be 
charged and discharged hundreds of 
times, but it will eventually wear out.
Talk and standby times are estimates 
only. Actual times are affected by, for 
example, device settings, features being 
used, battery condition, and temperature.