Nokia N82

Page 157
background image
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network
supports them.
To enter the settings for the selected security mode,
select 
WLAN security settings
.
Security settings for WEP
●
WEP key in use
  — Select the wired equivalent
privacy (WEP) key number. You can create up to
four WEP keys. The same settings must be
entered on the WLAN access point device.
●
Authentication type
  — Select 
Open
 or
Shared
 for the authentication type between
your device and the WLAN access point device.
●
WEP key settings
  — Enter 
WEP encryption
(length of the key), 
WEP key format
 (
ASCII
 or
Hexadecimal
), and 
WEP key
 (the WEP key data
in the selected format).
Security settings for 802.1x and WPA/WPA2
●
WPA/WPA2
  — Select the means of
authentication: 
EAP
 to use an extensible
authentication protocol (EAP) plug-in, or 
Pre-
shared key
 to use a password. Complete the
appropriate settings:
●
EAP plug-in settings
  — Enter the settings as
your service provider instructs.
●
Pre-shared key
  — Enter a password. The
same password must be entered on the WLAN
access point device.
●
WPA2 only mode
  — Only WPA2 enabled devices
are allowed to establish a connection in this
mode.
Advanced WLAN settings
Select 
Options
 > 
Advanced settings
 and from the
following:
●
IPv4 settings
  — Enter the IP address of your
device, the subnet IP address, the default
gateway, and the IP addresses of the primary and
secondary DNS servers. Contact your internet
service provider for these addresses.
●
IPv6 settings
  — Define the type of DNS address.
●
Ad-hoc channel
 (only for 
Ad-hoc
)  — To enter a
channel number (1-11) manually, select 
User
defined
.
●
Proxy server address
  — Enter the address for
the proxy server.
●
Proxy port number
  — Enter the proxy port
number.
Packet data settings
Press 
, and select 
Tools
 > 
Settings
 >
Connection
 > 
Packet data
.
The packet data settings affect all access points
using a packet data connection.
●
Packet data connection
  — If you select 
When
available
 and you are in a network that supports
packet data, the device registers to the packet
157
Se
ttings
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152 Page 153 Page 154 Page 155 Page 156 Page 157 Page 158 Page 159 Page 160 Page 161 Page 162 Page 163 Page 164 Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 171 Page 172 Page 173 Page 174 Page 175 Page 176 Page 177 Page 178