Nokia 500 navigācija autobraucējiem

Page 12
background image
G e t   s t a r t e d
12
1. Connect the charger to the mini USB port on the navigation device, 
and insert the charger plug into the cigarette lighter socket of your 
car. 
Power must be supplied by the 12 V car battery. Ensure that the 
charger is properly inserted in the cigarette lighter socket and does 
not interfere with the normal operation of the car.
In some car models, the cigarette lighter socket is powered by the car 
battery even when you remove the ignition key. In those cases, the 
car battery might be discharged if the navigation device is left on, or 
if the device is turned off but connected to the cigarette lighter 
socket for a long time. Contact the vehicle manufacturer for more 
information.
The indicator light is orange during charging. If charging does not 
start, disconnect the charger, and plug it in again. 
2. When the battery is fully charged, the indicator light turns green. 
Disconnect the charger from the cigarette lighter socket.
If you use the TMC (traffic message channel) service with the 
navigation device, keep the charger connected to the navigation 
device as the charger includes the TMC antenna.
When battery power is low, the indicator light is red, the battery icon 
shows one bar or no bars, and a text about low battery is displayed.
■ First use
To switch on the navigation device for the first time, slide the main 
power switch to the right. 
When you are asked to calibrate the screen, tap and briefly press the 
displayed crosshair with your finger. Repeat this as the crosshair moves 
around the screen. To calibrate the screen later, see “System,” p. 23.
When you are asked to select the language, tap the desired language 
and 
. The language is used for display texts and spoken navigation 
instructions.
Carefully read and accept the displayed safety notice, and tap the right 
arrow. (To hide this screen in the future, tap the related selection box.)