Nokia 500 navigācija autobraucējiem

Page 18
background image
G e t   s t a r t e d
18
the cup and the windscreen (2). Check that the suction cup is firmly 
attached. 
If you want to detach the mounting device from the windscreen, 
carefully push the locking lever toward the top of the mounting device, 
and pull the strap located on the edge of the suction cup.
Place navigation device into holder
To place the navigation device into the mobile holder, insert the catches 
at the bottom of the holder into the recesses at the bottom of the device 
(3). 
Press the navigation device toward the back of the holder so that the 
catches on the two arms of the holder click into the corresponding slots 
at the sides of the device (4). Ensure that the screen is clearly visible for 
the user.
If you want to release the navigation device from the mobile holder, 
push the arms of the holder.
Set navigation device to desired position
Do not adjust the mounting device while driving. 
To set the navigation device to the desired vertical position, loosen the 
two screws at the sides of the mounting device, turn the navigation 
device to the desired position, and tighten the screws (5). 
To set the navigation device to the desired horizontal position, loosen 
the screw below the mounting device, turn the navigation device to the 
desired position, and tighten the screw (6). 
Ensure that the navigation device is firmly locked into place.
■ Memory card
The device comes with a memory card and an adapter. You can only use 
memory cards formatted with the FAT or FAT32 file system with this 
device.
The device supports the SDHC (SD High-Capacity) standard that allows 
for the use of memory cards of up to 16 gigabytes.