Nokia 6210 Navigator

Page 10
background image
10
G e t   s t a r t e d
1. Open the memory card slot door.
2. Place the memory card in the slot 
with the gold-coloured area 
facing down. Push the card gently 
to lock it into place.
3. Close the slot door.
Remove a memory card
Important: Do not remove the memory card in the middle of an operation when 
the card is being accessed. Removing the card in the middle of an operation may 
damage the memory card as well as the device, and data stored on the card may be 
corrupted.
1. In the standby mode, briefly press the power key.
2. Scroll to 
Remove memory card
, and select 
OK
> 
Yes
.
3. Open the memory card slot door.
4. Push the card gently to release it.
5. Pull the card out, and select 
OK
.
6. Close the slot door.
■ Charge the battery
Your battery has been precharged but the charging levels may vary.
1. Connect the charger to the wall outlet.
2. Connect the charger to the device. 
You can use your device while it is 
charging.
3. When the battery is fully charged, 
disconnect the charger from the 
device, then from the wall outlet.
If the battery is completely discharged, 
it may take a few minutes before the 
charging indicator appears on the 
display or before any calls can be made.
The charging time depends on the charger and the battery used.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82