Nokia 6720 classic

Page 10
background image
Get started 
2.  Place the card in 
the slot with the 
contact area 
facing down (2). 
3.  Push the card 
gently to lock it
into place. Close 
the slot cover (3). 
Remove a memory card 
Important:  Do not remove the memory card during 
an operation when the card is being accessed. Doing so may 
damage the memory card and the device, and corrupt data 
stored on the card. 
1.  Press the power key briefly, and select Remove memory 
card > Yes
2.  Open the memory card slot cover. 
3.  Press the memory card gently to release it. 
4.  Pull the card out, and press OK
5.  Close the slot cover. 
Charge the battery
Your battery has been partially charged at the factory. If the 
device indicates a low charge, do the following: 
1.  Connect the charger to a wall outlet. 
2.  Connect the charger to 
the device. 
3.  When the device 
indicates a full charge,
disconnect the charger
from the device, then 
from the wall outlet. 
You can also charge the 
battery with a USB data 
cable connected to a 
compatible computer. 
1.  Connect the USB data cable to a USB port of a computer 
and to your device. 
2.  When the battery is fully charged, disconnect the USB data 
cable. 
USB charging efficiency varies significantly. In some cases, it 
may take a very long time for charging to start and the device 
to start functioning. You do not need to charge the battery 
for a specific length of time, and you can use the device while 
it is charging. If the battery is completely discharged, it may
take several minutes before the charging indicator appears 
on the display or before any calls can be made. 
© 2009 Nokia. All rights reserved. 
10