Nokia 9300

Page 84
background image
To open the configuration log, select a profile, and press 
Configuration log
. The log file shows the latest configuration status of
the selected profile.
Creating a new configuration server profile
The configuration server profile contains the settings for the remote server. You can create several profiles if you need to access
multiple servers.
You may receive the configuration server profile settings as a special message from your service provider.
1. If you have no profiles defined, press 
New
, otherwise press Menu, and select 
File
 > 
New
.
2. If you already have profiles defined, choose whether you want to copy the values from an existing profile to be used as the
basis for the new profile.
3. The 
Profile settings
 dialog opens.
Define the following settings on the different pages of the dialog:
•
Server name
 — Type a name for the configuration server.
•
Server ID
 — Type the unique ID to identify the configuration server. Contact your service provider or system administrator
for the correct value.
•
Password
 — Write a password to identify your device to the server. Confirm the password.
•
Active
 — Select 
Yes
 to allow the server to initiate a configuration session.
•
Accepted
 — Select 
Yes
 if you do not want the server to ask for your confirmation when it initiates a configuration session.
•
Connection type
 — Select how you want to connect to the server.
•
Access point
 — Select the access point you want to use for the data connection to the server.
•
Host address
 — Type the URL address of the server. Contact your service provider or system administrator for the correct
value.
•
Port
 — Type the port number of the server. Contact your service provider or system administrator for the correct value.
•
User name
 — Enter your user ID for the configuration server. Contact your service provider or system administrator for
your correct user ID.
•
Password
 — Type your password for the configuration server. Confirm it in the 
Confirm password
 field. Contact your service
provider or system administrator for the correct password.
•
HTTP authentication
 — Select 
Yes
 if you need to send your user name and password to the HTTP server. In the 
HTTP
authentication
 dialog, enter your user name and password, and press 
Done
.
To edit the configuration profile settings, select the profile, and press 
Edit
.
To delete a profile, select the profile, and press the backspace key.
Tip: If you have deleted or modified the predefined PC Suite profile, you can restore it by pressing Menu, and selecting
Tools
 > 
Reset PC Suite profile
.
Data connections
This device supports packet data (GPRS), high-speed data calls (HSCSD), and GSM data calls.
Packet data (general packet radio service, GPRS)
GPRS enables wireless access for mobile phones to data networks (network service). GPRS uses packet data technology where
information is sent in short bursts of data over the mobile network. The benefit of sending data in packets is that the network
is occupied only when sending or receiving data. As GPRS uses the network efficiently, it allows for quick data connection set
up and fast data transmission speeds.
You must subscribe to the GPRS service. For availability and subscription to GPRS, contact your network operator or service
provider.
Enhanced GPRS (EGPRS) is similar to GPRS, but it enables faster connection. For more information on the availability of EGPRS
and data transfer speed, contact your network operator or service provider. Note that when you have selected GPRS as a data
bearer, the device uses EGPRS instead of GPRS if this is available in the network.
Note that during a voice call, you cannot establish a GPRS connection, and an existing GPRS connection is put on hold.
High-speed data calls (high-speed circuit switched data, HSCSD)
HSCSD is comparable to the speed of many computer modems that communicate with fixed telephone networks.
For availability and subscription to high-speed data services, please contact your network operator or service provider.
Note that sending data with HSCSD may drain the battery faster than normal voice or data calls, as the device may send data
more frequently to the network.
C o n n e c t i v i t y
Copyright © 2004-2005 Nokia. All Rights Reserved.
84
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103