Nokia N80 Internet Edition

Page 15
background image
Your Nokia N80
15
Features using wireless LAN, or allowing such features to 
run in the background while using other features, increase 
the demand on battery power and reduce the battery life.
Your device supports the following wireless LAN features:
• IEEE 802.11b/g standard
• Operation at a frequency of 2.4 GHz
• Encryption methods wired equivalent privacy (WEP) 
with keys up to 128 bits, Wi-Fi protected access (WPA), 
and 802.1x. These functions can be used only if they are 
supported by the network.
You can create an internet access point (IAP) in a wireless 
LAN, and use it for applications that need to connect to the 
internet.
Create an internet access point
1
Press , 
and 
select 
Connect.
> 
Conn. mgr.
> 
Availab. WLAN
.
2
The device searches for wireless LANs within range.  
Scroll to the network in which you want to create an 
internet access point, and select 
Options
> 
Define 
access point
.
3
The device creates an internet access point with default 
settings. To view or change these settings, see ‘Access 
points’, p. 105.
When an application asks you to select an access point, 
select the created access point, or to search for wireless 
LANs in range, select 
Search for WLAN
.
A wireless LAN connection is established when you create 
a data connection using a wireless LAN internet access 
point. The active wireless LAN connection ends when you 
end the data connection. To end the connection, see 
‘Connection manager’, p. 93.
You can use wireless LAN during a voice call or when 
packet data is active. You can only be connected to one 
wireless LAN access point device at a time, but several 
applications can use the same wireless LAN connection.
When you activate the 
Offline
 profile, you can still use 
wireless LAN (if available). Remember to comply with any 
applicable safety requirements when establishing and 
using a wireless LAN connection.
There are two operating modes in wireless LAN: 
infrastructure and ad hoc.
In the infrastructure operating mode, your device is 
connected to a wireless LAN access point device. Through 
the access point device, you can access other compatible 
devices or a wired LAN.
In the ad hoc operating mode, compatible devices can 
send and receive data directly with each other. To create 
an internet access point for the ad hoc network, see 
‘Access points’, p. 105.
 Tip! To check the unique Media Access Control (MAC) 
address that identifies your device, enter 
*#62209526# in the standby mode.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133