Nokia N81

Page 71
background image
Connections
71
When the device is in the 
Offline
 profile, you can still use 
wireless LAN (if available). Remember to comply with any 
applicable safety requirements when establishing and 
using a wireless LAN connection.
 Tip! To check the unique media access control (MAC) 
address that identifies your device, enter 
*#62209526# in the standby mode.
WLAN wizard 
The WLAN wizard helps you to connect to a wireless LAN 
and manage your wireless LAN connections.
The WLAN wizard shows the status of your wireless LAN 
connections in the active standby mode. To view the 
available options, scroll to the row showing the status, and 
press .
If the search finds wireless LANs, and for example, 
WLAN 
network found
 is displayed, to automatically create an IAP 
and start the web browser using this IAP, select the status, 
Start Web browsing
, and the network.
If you select a secured wireless LAN network, you are asked 
to enter the relevant passcodes. To connect to a hidden 
network, you must enter the correct network name (service 
set identifier, SSID). To create a new access point for a 
hidden WLAN, select 
New WLAN
. After entering the 
required data, the connection is automatically tested.
If you are connected to a wireless LAN, the IAP name is 
displayed. To start the web browser using this IAP, select 
the status and 
Continue Web browsing
. To end the 
connection in the wireless LAN, select the status and 
Disconnect WLAN
.
If wireless LAN scanning is off and you are not connected 
to any wireless LAN, 
WLAN scanning off
 is displayed. To 
set scanning on and search for available wireless LANs, 
scroll to the row showing the status, and press 
.
To start a search for available wireless LANs, select a status 
and 
Search for WLAN
. To set wireless LAN scanning off, 
select a status and 
WLAN scanning off
.
To access the WLAN wizard in the menu, press 
, and 
select 
Tools
> 
WLAN wiz.
.
Wireless LAN access points
To search for wireless LANs available within range, 
press
, and select 
Tools
> 
WLAN wiz.
.
Select 
Options
 and from the following:
Filter WLAN networks
—to filter out wireless LANs in the 
list of found networks. The selected networks are filtered 
out the next time the application searches for wireless 
LANs.
Details
—to view the details of a network shown in the list. 
If you select an active connection, the connection details 
are displayed.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139