Nokia Universal Holder CR-122

Page 6
background image
ENGLISH
and clean the surface thoroughly with 
a glass cleaner and a clean towel. If 
the ambient temperature is below 
+15°C (60°F), carefully warm the 
surface and the suction cup with a 
hair dryer to ensure a firm grip on the 
windscreen. Make sure you do not 
heat the windscreen excessively to 
avoid damage to it.
Press the suction cup of the mounting 
device against the windscreen (see 
step 1C), and rotate the ring on the 
mounting device clockwise (1D) to 
create a vacuum between the suction 
cup and the windscreen. Check that 
the mounting device is firmly 
attached (1E).
To detach the suction cup from the 
windscreen, rotate the ring on the 
mounting device anticlockwise (6), 
pull the strap located on the edge of 
the suction cup (7), and pull the holder 
with the mounting device from the 
windscreen (8).
Attach to a dashboard
Attach the mounting device to 
the dashboard
If the product was supplied with an 
adhesive pad, you can attach the 
mounting device to the dashboard.
Make sure the surface where you 
attach the adhesive pad on the 
dashboard is flat, dry, and free from 
dirt and dust.
Peel off the protective sheet from the 
adhesive side of the pad (see step 2A), 
and press the pad against the 
dashboard so that it stays firmly in 
place. When you peel off the 
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8