Nokia Universal Holder CR-122

Page 7
background image
ENGLISH
protective sheet from the pad, do not 
touch the adhesive side.
Press the suction cup of the mounting 
device against the pad (2B).
Turn the catch on the mounting device 
to the desired position (2C). Rotate 
the ring on the mounting device 
clockwise (2D) to create a vacuum 
between the suction cup and the pad.
To detach the suction cup from the 
pad, proceed in the same way as when 
you detach the cup from a windscreen 
(6, 7, and 8).
Attach the holder to the 
mounting device
To attach the mobile holder to the 
mounting device, insert the catch on 
the mounting device into the slot at 
the back of the holder (2E). Rotate the 
holder clockwise about 90 degrees 
until it locks into place (2F). Make sure 
the mounting device is firmly 
attached (2G).
To detach the holder from the 
mounting device, rotate it 
anticlockwise.
Place or remove the mobile device
Do not place or remove a mobile 
device while driving.
To place your device into the holder, 
insert the device into the holder (see 
step 3), press the back of the holder 
with your thumb, and push the device 
to the back (4). Slide the switch at the 
top of the holder to the left (5). Make 
sure the device is firmly locked in 
place. To charge the battery of your 
device, use a compatible charger. 
Connect the charger plug to the 
charger connector on your device.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8