Nokia 5800 XpressMusic

Page 55
background image
 —  Select the scene.
 or 
 —  Switch between video and image mode.
 or   —  Show or hide the viewfinder grid (images only).
 —  Activate the self-timer (images only).
 —  Activate sequence mode (images only).
  —  Open Gallery.
Image settings:
 —  Select a colour effect.
 —  Adjust the white balance. Select the current lighting
conditions. This allows the camera to reproduce colours more
accurately.
 —  Adjust the exposure compensation (images only). If
you are shooting a dark subject against a very light
background, such as snow, adjust the exposure to +1 or +2
to compensate for the background brightness. For light
subjects against a dark background, use -1 or -2.
 —  Adjust light sensitivity (images only). Increase the light
sensitivity in low light conditions to avoid too dark images
and blurry images. Increasing the light sensitivity may also
increase the image noise.
 —  Adjust contrast (images only). Adjust the difference
between the lightest and darkest parts of the image.
   —  Adjust sharpness (images only).
The screen display changes to match the settings you define.
The capture settings are shooting-mode specific. Switching
between the modes does not reset the defined settings.
If you select a new scene, the capture settings are replaced
by the selected scene. You can change the capture settings
after selecting a scene if needed.
Saving the captured image may take longer if you change the
zoom, lighting, or colour settings.
Capture an image
When capturing an image, note the following:
● Use both hands to keep the camera steady.
● The quality of a digitally zoomed image is lower than that
of a non-zoomed image.
● The camera goes into battery saving mode after about a
minute of inactivity.
● Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
1. To switch from video mode to image mode, if necessary,
select   > 
.
2. Press the capture key. Do not move the device before the
image is saved and the final image displayed.
Capture images with the secondary camera
1. Select 
Options
 > 
Use back camera
.
2. To capture an image, select
. Do not move the device
before the image is saved and the final image displayed.
Camera
© 2011 Nokia. All rights reserved.
55
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112