Nokia E61

Page 15
background image
WLAN troubleshooting
15
Copyright © 2006 Nokia. All rights reserved.
WLAN troubleshooting
Some common problems that may occur when using WLAN 
are discussed in this section.
• Wrong proxy settings: if you cannot browse the Web 
even though the WLAN connection is working and the 
IP settings seem to be correct, check that the HTTP/
HTTPS proxy settings are defined correctly in the 
advanced settings of your WLAN access point.
• Problems with the WEP security mode: if you 
encounter these, check that the WEP keys have been 
entered in the correct format (ASCII vs. HEX) and have 
the right number of characters. ASCII WEP keys are also 
case sensitive; check that you have not confused any 
upper or lower case letters in the key.
Incorrect WEP keys may cause a situation where Nokia 
E61 is able to associate with a WLAN network but no 
data can be transferred.
Also remember to check that the WEP authentication 
mode is correct. In the access point it may be called, for 
example, “WEP authentication”, “shared-key 
authentication” or “Wi-Fi security mode”.
• Poor signal quality: to check the signal quality of your 
WLAN connection, select Menu
→ 
Connect.
→ 
Conn. 
mgr.
→ 
Act. data conn.
 Options
→ 
Details
. If the signal 
quality is weak or even moderate, you may encounter 
connection problems. Try again nearer the access point.
• Wrong security mode: it is possible that you have 
configured the security mode correctly, but it may not 
be the right mode. To check the security mode that the 
network uses, select Menu
→ 
Connect.
→ 
Conn. mgr.
→ 
Act. data conn.
 Options
→ 
Details
.
• Problems with the WPA/WPA2 or 802.1x security 
mode: if you encounter these, check the following:
1
Check that the WPA mode is the right one (pre-
shared key or EAP).
2
Check the pre-shared key.
3
Check that all EAP types that are not needed are 
disabled.
4
Check that EAP type settings are correct (passwords, 
user names, certificates, etc.).
• Problems with access point configuration: if you 
encounter these, check the following:
1
Many WLAN access points contain proprietary 
“Turbo” mode’s claiming to enhance data rates.  
These functionalities should be disabled from the 
IAP if there is any reason to believe that they are 
causing problems to legacy WLAN terminals.
2
Many interoperability problems are solved by 
updating the IAP firmware to the latest version.
• Not all channels are available: if you use the device 
in the offline mode or in the USA, only channels 1-11 
are available. Channels 1-13 are available in Europe.
• Finally...: remember that all Wi-Fi certified devices are 
unfortunately not compatible, even if they are 
supposed to be.
Nokia_E61_Using_WLAN_en_1.fm  Page 15  Monday, June 5, 2006  6:08 PM