Nokia E72

Page 116
background image
setting is only available if you have defined internet call
service settings.
•
Reject call with message
  — Reject a call, and send a
text message to the caller.
•
Message text
  — Write the standard text message that
is sent when you reject a call.
•
Own video in recvd. call
  — Allow or deny video
sending during a video call from your device.
•
Image in video call
  — Display a still image if video is
not sent during a video call.
•
Automatic redial
  — Set your device to make a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press the end key.
•
Show call duration
  — Display the length of a call
during the call.
•
Summary after call
  — Display the length of a call after
the call.
•
Speed dialling
  — Activate speed dialling.
•
Anykey answer
  — Activate anykey answer.
•
Line in use
  — This setting (network service) is shown
only if the SIM card supports two subscriber numbers,
that is, two phone lines. Select which phone line you
want to use for making calls and sending text
messages. Calls on both lines can be answered
irrespective of the selected line. If you select 
Line 2
 and
have not subscribed to this network service, you are not
able to make calls. When line 2 is selected,   is
displayed in the home screen.
•
Line change
  — Prevent line selection (network
service), if supported by your SIM card. To change this
setting, you need the PIN2 code.
•
Noise cancellation
  — Activate earpiece active noise
cancellation.
•
Contact search
  — Activate contact search in the home
screen.
Network settings
Select 
Menu
 > 
Ctrl. panel
 > 
Settings
 and 
Phone
 >
Network
.
To select the network mode, select 
Network mode
 and
Dual mode
, 
UMTS
, or 
GSM
. In dual mode, the device
switches automatically between networks.
Tip: Selecting 
UMTS
 enables faster data transfer,
but may increase the demand on battery power and
reduce the battery life. In regions close to both GSM
and UMTS networks, selecting 
Dual mode
 may
cause constant jumping between the two networks,
which also increases the demand on battery power.
To select the operator, select 
Operator selection
 and
Manual
 to select from available networks, or 
Automatic
to set the device to select the network automatically.
To set the device to indicate when it is used in a
microcellular network (MCN), select 
Cell info display
 >
On
.
Connection settings
Select 
Menu
 > 
Ctrl. panel
 > 
Settings
 and 
Connection
.
Select from the following:
•
Bluetooth
  — Edit the Bluetooth settings.
•
USB
  — Edit the data cable settings.
•
Destinations
  — Set up new or edit existing access
points. Some or all access points may be preset for your
116
Sett
ing
s
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141