Nokia E72

Page 16
background image
5. Pull out the memory card, and close the memory card
slot cover. If the device is switched on, select 
OK
.
Antenna locations
Your device may have internal and external antennas.
Avoid touching the antenna area unnecessarily while the
antenna is transmitting or receiving. Contact with
antennas affects the communication quality and may
cause a higher power level during operation and may
reduce the battery life.
Switch the device on
and off
To switch on the device:
1. Press and hold the power key.
2. If the device asks for a PIN code or lock code,
enter it, and select 
OK
. The preset lock code
is 12345. If you forget the code and your
device is locked, your device will require
service and additional charges may apply. For
more information, contact a Nokia Care point or your
device dealer.
To switch off the device, press the power key briefly, and
select 
Switch off!
.
Charge the battery
Your battery has been partially charged at the factory. If
the device indicates a low charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger plug to the device.
If you are using a USB charger, connect the charger plug
to the USB connector.
3. When the device indicates a full charge, disconnect the
charger from the device, then from the wall outlet.
You do not need to charge the battery for a specific length
of time, and you can use the device while it is charging. If
the battery is completely discharged, it may take several
minutes before the charging indicator appears on the
display or before any calls can be made.
Charging with the USB data cable
Charging with the USB data cable is slower than charging
with the charger. Charging with the USB data cable may
16
Get star
ted