Nokia N71

Page 97
background image
Tools
97
Copyright © 2006 Nokia. All rights reserved. 
Cell info display
—Select 
On
 to set the device to indicate 
when it is used in a cellular network based on 
microcellular network (MCN) technology and to activate 
cell info reception.
Enhanc. sett.
In the standby mode, 
 indicates a compatible headset 
is connected, and  
 that the headset is unavailable, or 
a Bluetooth connection to a headset is lost. 
 indicates 
a compatible loopset is connected,  
 that a 
Text 
phone
 is connected, and 
 that a car kit is connected.
Select 
Headset
, 
Loopset
, 
Text phone
, 
Bluetooth 
handsfree
, or 
Car kit
 and from the following:
Default profile
—Set the profile that you want activated 
each time you connect a certain enhancement to your 
device. See ‘Profiles—set tones’, p. 78. 
Automatic answer
—Set if you want the device to answer 
an incoming call automatically after 5 seconds. If the 
Ringing type is set to 
Beep once
 or 
Silent
, automatic 
answer is disabled. Automatic answer is not available for 
Text phone
.
If you are using a 
Text phone
, you must activate it on your 
device. Press 
, and select 
Tools
> 
Settings
> 
Enhancement
> 
Text phone
> 
Use text phone
> 
Yes
.
Voice commands
You can use voice commands to control your device. For 
more information about the enhanced voice commands 
supported by your device, see ‘Voice dialing’, p. 50.
To activate enhanced voice commands for starting 
applications and profiles, you must open the 
Voice cm.
 
application and its 
Profiles
 folder. Press 
, and select 
Tools
> 
Voice cm.
> 
Profiles
; the device creates voice tags 
for the applications and profiles. To use enhanced voice 
commands, press and hold 
 in the standby mode, and 
say a voice command. The voice command is the name of 
the application or profile displayed in the list.
 Tip! Alternatively, to define the side key to use voice 
To add more applications to the list, select 
Options
> 
New 
application
. To add a second voice command that can be 
used to start the application, select 
Options
> 
Change 
command
, and enter the new voice command as text. 
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesized voice tag, select 
Options
> 
Playback
.
To change voice command settings, select 
Options
> 
Settings
. To switch off the synthesizer that plays 
recognized voice tags and commands in the selected 
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114