Nokia N95

Page 122
background image
Settings
122
To change the settings for a TV-Out connection, select 
TV-
Out
 and from the following:
Default profile
—Set the profile that you want activated 
each time you connect a Nokia Video Connectivity Cable to 
your device.
TV screen size
—Select the aspect ratio of the TV: 
Normal
 
or 
Widescreen
 for widescreen TVs.
Tv system
—Select the analog video signal system that is 
compatible with your TV.
Flicker filter
—To improve image quality on the screen of 
your TV, select 
On
. The flicker filter may not diminish 
image flicker on all TV screens.
Security
To edit settings related to the security,  press 
, and 
select 
Tools
Settings
General
Security
Phone 
and SIM card
Certificate management
, or 
Security 
module
.
Phone and SIM card
PIN code request
—When active, the code is requested 
each time the device is switched on. Deactivating the 
personal identification number (PIN) code request may not 
be allowed by some SIM cards.
PIN code
PIN2 code
, and 
Lock code
—You can change the 
lock code, PIN code, and PIN2 code. These codes can only 
include the numbers from 0 to 9. If you forget any of these 
codes, contact your service provider. See ‘Glossary of PIN 
and lock codes’, 
p. 123.
Avoid using access codes similar to the emergency 
numbers to prevent accidental dialling of the emergency 
number.
Keypad autolock period
—Select whether the keypad is  
locked when your device has been idle for a certain period 
of time.
Phone autolock period
—To avoid unauthorised use, you 
can set a time-out after which the device automatically 
locks. A locked device cannot be used until the correct lock 
code is entered. To turn off the autolock period, select 
None
.
When the device is locked, calls may be possible to the 
official emergency number programmed into your device.
 Tip! To lock the device manually, press 
. A list of 
commands opens. Select 
Lock phone
.
Lock keys if slide closed
—Select whether the keypad is 
locked when you close the 2-way slide.
 Tip! To lock or unlock the keypad manually, press 
then