Nokia 6681

Page 89
background image
Tools
89
Copyright © 2005 Nokia. All rights reserved.
Summary after call
—Activate this setting if you want the 
phone to briefly display the approximate duration of the 
last call.
Speed dialling
—Select 
On
, and the numbers assigned to 
the speed dialling keys (
 - 
) can be 
dialled by pressing and holding the key. See also ‘Speed dial 
a phone number’, p. 21.
Anykey answer
—Select 
On
, and you can answer an 
incoming call by briefly pressing any key, except 
, 
, , 
and 
.
Line in use
 (network service)—This setting is shown only if 
the SIM card supports two subscriber numbers, that is, two 
phone lines. Select which phone line you want to use for 
making calls and sending text messages. Calls on both lines 
can be answered irrespective of the selected line. If you 
select 
Line 2
 and have not subscribed to this network 
service, you will not be able to make calls. When line 2 is 
selected, 
 is shown in the standby mode.
 Tip! To switch between the phone lines, press and 
hold 
 in the standby mode.
Line change
 (network service)—To prevent line selection, 
select 
Disable
 if supported by your SIM card. To change 
this setting, you need the PIN2 code.
Connection settings
Data connections and access points
Your phone supports packet data connections (
), such as 
GPRS in the GSM network.
 Glossary: General packet radio service (GPRS) uses 
packet data technology where information is sent in 
short packets of data over the mobile network.
To establish a data connection, an access point is required. 
You can define different kinds of access points, such as: 
• MMS access point to send and receive multimedia 
messages 
• Access point for the Web application to view WML or 
XHTML pages
• Internet access point (IAP) to send and receive e-mail 
Check the kind of access point you need with your service 
provider for the service you wish to access. For availability 
and subscription to packet data connection services, 
contact your network operator or service provider.
Packet data connections in GSM networks
When you use your phone in GSM networks, multiple data 
connections can be active at the same time, access points 
can share a data connection, and data connections remain 
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113