Nokia E60

Page 12
background image
3. Close the memory card compartment door.
Important:  Do not remove the MMC card in the
middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as
the device, and data stored on the card may be
corrupted.
Charge the battery
1. Connect the charger to a wall outlet.
2. Connect the power cord to the bottom of the device.
The battery indicator bar starts scrolling on the
display. If the battery is completely discharged, it may
take a few minutes before the charging indicator is
shown. The device can be used while charging.
3. When the battery is fully charged, the bar stops
scrolling. Disconnect the charger from the device, then
from the outlet.
Switch on your device
1. To switch the device on, press the power key.
2. If the device asks for a PIN code (or UPIN code, if you
have a USIM card), lock code or security code, enter the
code, and select 
OK
.
3. To switch the device off, press the power key.
Tip: When you switch the device on, it may
recognize the SIM card provider and configure
the correct text message, multimedia message,
and GPRS settings automatically. If not, contact
your service provider for the correct settings, or
use the 
Sett. wizard
 application.
The device can be used without the network dependant
phone functions when a SIM card is not inserted or when
the 
Offline
 profile is selected.
The picture shows the location of the power key.
Enter basic settings
When you power on the device for the first time, and
when you power on the device after the battery has been
empty or removed for a longer period of time, your device
12
G
e
t sta
r
ted
file:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml
Page 12
Feb 23, 2006 10:58:54 AM
file:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml
Page 12
Feb 23, 2006 10:58:54 AM