Nokia E60

Page 86
background image
•
Edit
 — Edit the selected access point. If the access
point is in use or its settings are protected, you cannot
edit it.
•
New access point
 — Create a new VPN access point.
•
Delete
 — Delete the selected access point.
VPN access point settings
Contact your service provider for the correct access point
settings.
To edit VPN access point settings, select the access point
and 
Options
.
Select from the following:
•
Connection name
 — Enter a name for the VPN
connection. The maximum length of the name is 30
characters.
•
VPN policy
 — Select a VPN policy to be used with this
access point.
•
Internet access pt.
 — Select the Internet access point
to be used with this VPN access point.
•
Proxy serv. address
 — Enter the proxy server address
of this VPN access point.
•
Proxy port number
 — Enter the number of the proxy
port.
Wireless LAN
Select 
Menu
 > 
Tools
 > 
Settings
 > 
Connection
 >
Wireless LAN
.
To have an indicator displayed when there is a wireless
LAN available in your current location, select 
Show
availability
 > 
Yes
.
To select the time interval for your device to scan for
available wireless LANs and update the indicator, select
Scan for networks
. This setting is not visible unless you
select 
Show availability
 > 
Yes
.
Advanced WLAN settings
Select 
Menu
 > 
Tools
 > 
Settings
 > 
Connection
 >
Wireless LAN
 > 
Options
 > 
Advanced settings
. The
wireless LAN advanced settings are normally defined
automatically, and changing them is not recommended.
To edit the settings manually, select 
Automatic config.
 >
Disabled
, and define the following:
•
Long retry limit
 — Enter the maximum number of
transmission attempts if the device does not receive a
receiving acknowledgement signal from the network.
•
Short retry limit
 — Enter the maximum number of
transmission attempts if the device does not receive a
clear-to-send signal from the network.
•
RTS threshold
 — Select the data packet size at which
the wireless LAN access point device issues a request
to send before sending the packet.
•
TX power level
 — Select the power level of your device
when sending data.
•
Radio measurements
 — Enable or disable the radio
measurements.
To restore all settings to their original values, select
Options
 > 
Restore defaults
.
86
Settings
file:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml
Page 86
Feb 23, 2006 10:58:54 AM
file:///C:/USERS/MODEServer/zmao/15544327/rm-49_mars/en/issue_3/rm-49_mars_en_3.xml
Page 86
Feb 23, 2006 10:58:54 AM
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113