Nokia E65

Page 26
background image
Change the barring password
To change the password used for barring voice, fax, and data calls, select 
Menu
 > 
Tools
 > 
Settings
 > 
Call barring
 > 
Cellular
call barring
 > 
Options
 > 
Edit barrings passw.
. Enter the current code, then the new code twice. The barring password must be
four digits long. For details, contact your service provider.
Send DTMF tones
You can send dual tone multi-frequency (DTMF) tones during an active call to control your voice mailbox or other automated
phone services.
To send a DTMF tone sequence, make a call, and wait until the other end answers. Select 
Menu
 > 
Options
 > 
Send DTMF
. Type
the DTMF tone sequence, or select a predefined sequence.
To attach DTMF tone sequences to contact cards, press the contacts key. Open a contact, and select 
Options
 > 
Edit
 > 
Options
 >
Add detail
 > 
DTMF
. Enter the tone sequence. Press * three times to insert p, a pause of about 2 seconds before or between DTMF
tones. Select 
Done
. To set the device to send the DTMF tones only after you select 
Send DTMF
 during a call, press * four times to
insert w.
Video calls
To be able to make a video call, you must be within coverage of a UMTS network. For availability of and subscription to video
call services, contact your network operator or service provider. While talking, you can send a real-time video to the recipient's
compatible mobile phone and see a real-time video sent by the recipient, if the recipient has a compatible mobile phone with
a video camera. A video call can only be made between two parties.
Warning:  Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely
loud.
To make a video call, enter the phone number or select the recipient of the call from 
Contacts
, and select 
Options
 > 
Call
 >
Video call
. You cannot convert the video call to a normal voice call.
To answer a video call, press the call key or open the slide. If 
Allow video image to be sent to caller?
 is shown on the display,
select 
Yes
 to send a video to the caller or 
No
 to disable video sending.
Tip: In case you do not want to send a video during video calls, you can send a still image instead. Select the still image
to be sent in 
Menu
 > 
Tools
 > 
Settings
 > 
Call
 > 
Image in video call
 > 
Use selected
.
During the call, select 
Options
 and from the following:
•
Audio
 — Talk to the recipient of the call.
•
Use video
 — See video without audio.
•
Loudsp.
 — Select to use the loudspeaker for receiving audio.
•
Handset
 — Mute the loudspeaker and use the handset.
Net calls
With the net call service (network service), you can make and receive calls over the internet.
Your device supports voice calls over the internet (net calls). Your device attempts emergency calls primarily over cellular
networks. If an emergency call using cellular networks is not successful, your device attempts an emergency call through your
net call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency calls, if
possible. If you have cellular network coverage available, make sure that your cellular phone is switched on and ready to make
calls before you attempt an emergency call. The capability for an emergency call using internet telephony depends on the
availability of a WLAN network and your net call provider's implementation of emergency call capabilities. Contact your net call
provider to check the internet telephony emergency call capability.
VoIP (voice over internet protocol) technology is a set of protocols that facilitate phone calls over an IP network, such as the
internet. VoIP phone calls can be established between computers, between mobile phones, and between a VoIP device and a
traditional telephone. To make or receive a VoIP call, your device must be within WLAN coverage, for example.
The availability of the net call service may vary according to your country or sales area.
Define the net call settings
Before you can make net calls, you need to define the net call settings. After you have defined the net call settings with these
instructions, your device logs in to the net call service automatically when you select 
Menu
 > 
Connect.
 > 
Internet tel.
.
First: define a SIP profile
1. Select 
Menu
 > 
Tools
 > 
Settings
 > 
Connection
 > 
SIP settings
 > 
Options
 > 
Add new
, and enter the required information.
Registration
 is set to 
Always on
.
Contact your net call provider for the correct information.
2. Select 
Proxy server
, and set 
Transport type
 to 
Auto
.
T e l e p h o n e
© 2007 Nokia. All rights reserved.
26
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99