Nokia E65

Page 58
background image
•
Use login script
 — Select 
Yes
, if your Internet service provider requires a login script, or if you want to automate your login.
A login script is a sequence of instructions that the system follows during the login process.
•
Login script
 — Enter the login script. This setting is available only if you have selected 
Use login script
 > 
Yes
.
•
Modem initialisation
 — Enter a command string for the connection setup, if required by your service provider.
Set up an Internet access point for packet data (GPRS)
1. Select 
Menu
 > 
Tools
 > 
Settings
 > 
Connection
 > 
Access points
.
2. Select 
Options
 > 
New access point
. To use an existing access point as a basis for the new one, select 
Use existing settings
.
To start with an empty access point, select 
Use default settings
.
3. Define the following settings.
•
Connection name
 — Enter a descriptive name for the connection.
•
Data bearer
 — Select 
Packet data
.
•
Access point name
 — Enter the name for the access point. The name is usually provided by your service provider or network
operator.
•
User name
 — Enter your user name if required by the service provider. User names are often case-sensitive and provided
by your service provider.
•
Prompt password
 — Select 
Yes
 to enter your password each time you log into a server or 
No
 to save the password in your
device memory and automate the login.
•
Password
 — Enter your password if required by the service provider. The password is often case-sensitive provided by
the service provider.
•
Authentication
 — Select 
Secure
 to always send your password encrypted or 
Normal
 to send your password encrypted
when possible.
•
Homepage
 — Enter the Web address of the page you want to display as a home page when you use this access point.
4. After defining the settings, select 
Options
 > 
Advanced settings
 to define the advanced settings or 
Back
 to save the settings
and exit.
Advanced Internet access point settings for packet data (GPRS)
After setting up a basic Internet access point for packet data (GPRS), select 
Options
 > 
Advanced settings
, and define the following
advanced settings.
•
Network type
 — Select 
IPv4
 or 
IPv6
 as the Internet protocol type. The Internet protocol defines how data is transferred to
and from your device.
•
Phone IP address
 — Enter the IP address of your device. Select 
Automatic
 to have the network provide the device IP address.
This setting is shown only if you select 
Network type
 > 
IPv4
.
•
DNS address
 — Enter the IP addresses of the 
Primary DNS address
 and 
Secondary DNS addr.
 if required by your service provider
or network operator. Otherwise, the name server addresses are provided automatically.
•
Proxy serv. address
 — Enter the address of the proxy server. Proxy servers are intermediate servers between a browsing
service and its users, which are used by some service providers. These servers may provide additional security and speed up
access to the service.
•
Proxy port number
 — Enter the proxy server port number. Proxy servers are intermediate servers between a browsing service
and its users, which are used by some service providers. These servers may provide additional security and speed up access
to the service.
Set up an Internet access point for wireless LAN
You can use the WLAN wizard to create Internet access points for wireless LAN, or define the access point manually. 
Cable connection
Install the USB data cable driver to your PC before you use a cable connection. You can use the 
Data transfer
 without installing
the USB data cable drivers.
Select 
Menu
 > 
Connect.
 > 
Data cbl.
.
Using a USB data cable, you can connect your device to a compatible PC . Connect the USB data cable to the bottom of the device.
To change the device type you normally connect to your device with the data cable, press the scroll key.
Select from the following:
•
Ask on connection
 — Select whether you want to be asked for the device type every time you connect the data cable to your
device.
•
PC Suite
 — Connect the PC Suite to your device with the data cable, and use your device as a modem.
•
Data transfer
 — Access and transfer data such as music or image files from your computer using the data cable connection.
To use the 
Data transfer
 mode, make sure that you have not selected USB as a connection type in the Manage connections
settings in Nokia PC Suite. Insert a memory card to your device, connect the device to a compatible computer with the USB
C o n n e c t i v i t y
© 2007 Nokia. All rights reserved.
58
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99