Nokia 7710

Page 28
background image
Genera
l
 informat
i
on
28
Copyright © 2005 Nokia. All rights reserved. 
recommended that you move the device to a location 
where the strongest possible wireless signal can be 
obtained. When the signal is strong, data transmission is 
efficient. In general, you should not expect the same 
performance from wireless data communications as from 
landline communications, due to the inherent 
characteristics of the wireless environment.
The following factors may impair wireless connections in 
the form of noise, low or lost signal, erroneous function of 
the device, or distorted display:
Noise – Radio interference from electronic appliances and 
equipment, as well as from other phones will affect the 
quality of wireless data transmission.
Roaming – As the smartphone user moves from one 
network cell to another, the signal strength of the channel 
drops and the wireless telephone exchange may hand the 
user over to a different cell and frequency, where the 
signal is stronger. A cell handover may also occur when 
the user is stationary, due to varying network traffic loads. 
Such handovers may cause slight delays in transmission. 
Electrostatic discharge – A discharge of static electricity 
from a finger or a conductor may cause erroneous 
functions in electrical devices. The discharge may result in 
distorted display and unstable software operation. 
Wireless connections may become unreliable, data may 
become corrupted, and transmission halted. In this case 
you need to end the existing call (if any), switch off the 
device (if on) and remove the battery. Then replace the 
battery and establish a new wireless connection.
Dead spots and dropouts – Dead spots are areas where 
radio signals cannot be received. Dropouts occur when the 
smartphone user passes through an area where the radio 
signal is blocked or reduced by geographical features or 
large structures.
Signal impairment – Distance and obstacles can cause 
signals to become out-of-phase. They can also cause 
reflected signals. Both situations result in a loss of signal 
strength.
Low signal strength – Due to either distance or obstacles, 
the radio signal strength from a cell site may not be strong 
enough or stable enough to provide a reliable data 
connection for communication. Therefore, to ensure the 
best possible communication, remember the following 
points:
• The data connection works best when the device is in 
a stationary position. Attempting wireless data 
communication while in a moving vehicle is not 
recommended.
• Do not place the device on a metal surface.
• Check that the signal strength on the smartphone 
display is sufficient. Moving the smartphone within a 
room, especially towards a window, may result in a 
stronger signal. If a signal is not strong enough to 
support a voice call, data connection should not be 
attempted until you can find a location with better 
signal reception.