Nokia Car Kit CK-200

Page 14
background image
G e t   s t a r t e d
14
■ Insert the remote control battery
The wireless remote control is powered by one CR2032 lithium coin cell 
battery. Replace the battery only with the same or equivalent type.
1. Slide the cover away from 
the device (1).
2. Insert the battery with the 
negative (-) terminal 
pointing towards the circuit 
board, and slide the cover 
back into place (2).
To avoid short-circuits that 
may damage the battery, do not handle or store the battery with metal 
objects.
To avoid battery leaks, remove the battery if the remote control is not 
used for a month or longer.
If the battery leaks, wipe the remote control completely clean, and 
install a new battery.
If the lithium coin battery is swallowed, seek medical attention 
immediately. If the battery becomes lodged in the oesophagus, remove 
it immediately.
Extreme temperatures reduce the performance and lifetime of the 
battery. The remote control may not work or 
Remote control battery low
 
may be displayed temporarily in temperatures well below freezing.
If you replace the remote control or use several ones 
with the car kit
If you replace the remote control or use several ones with the car kit, 
you must manually pair the new remote control with the car kit. 
Turn the ignition key to the off position, and detach the display from the 
mounting plate for about 10 seconds. Attach the display to the 
mounting plate, and press the power key to switch on the car kit. Press 
any key of the remote control.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47