Nokia Car Kit CK-200

Page 35
background image
I n s t a l l a t i o n
35
The display should be located so that it is clearly visible for the user and 
it can be easily rotated left, right, up, or down.
When installing the display, make sure it does not interfere with or 
hinder the steering or braking systems or other controls or systems used 
in the operation of the vehicle (for example, airbags).
Make sure the display cable reaches to the junction box.
For the built-in microphone, mount the display so that it is not too far 
from the driver or exposed to direct air streams from the vents. If this is 
not possible, use an optional external microphone.
Attach the mounting plate to the dashboard
1. Peel off the protective sheet from the adhesive on the mounting 
plate.
2. Press the mounting plate firmly to the dashboard.
3. Guide the display cable CA-165 of the mounting plate, for example, 
through the ventilation system (see the documentation of the car for 
details), and connect the cable to the respective connector on the 
junction box RX-73.
Attach the display to the mounting plate
1. Slide the display onto the mounting plate (1).
2. Set the display to the appropriate position (2).
1
2
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47