Nokia Car Kit CK-200

Page 39
background image
I n s t a l l a t i o n
39
Check the correct location of the mute signal for the car radio, 
and connect the configuration connector "Mute" to the 
corresponding socket (Mute1, Mute2, or Mute3). By default, the 
mute connector is connected to the ISO connector pin A2 
(Mute2). If the car radio does not support the mute function, 
leave the connector unconnected.
Plug the two ISO male connectors to the car radio.
2. Insert the speaker and power cable plugs of the ISO cable to the 
respective connectors on the junction box.
3. Connect the display to the respective connector on the junction box.
Optional steps:
• To charge a compatible mobile device through the car kit, connect a 
compatible charging cable (such as Nokia CA-134) to the junction 
box.
• To use an external microphone (such as Nokia MP-2) instead of the 
built-in one, connect the microphone to the respective connector on 
the junction box, and modify the microphone settings (see “Installer 
settings”, p. 43). In noisy car environments, you may need to use an 
external microphone.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47