Nokia 9500 Communicator

Page 67
background image
•
IP passthrough overrides PC Suite
 — Select this to automatically terminate a PC Suite connection via data cable when you
connect your device to a compatible PC and use the Internet or network connection of the PC.
RealPlayer settings
To access streaming data, such as real-time audio and video, you must set network and proxy settings for the RealPlayer
application.
To modify RealPlayer settings, select 
Connections
 > 
RealPlayer settings
.
On the 
Network
 and 
Proxy
 pages, define the following:
•
Connection timeout
 — Specify how long RealPlayer waits before reporting a network connection failure. Increase the time
if you frequently receive a time-out error.
•
Server timeout
 — Specify how long RealPlayer waits for a response from the media server before disconnecting.
•
Port range:
 — Specify the port range that is used for receiving data.
•
Use proxy:
 — Select 
Yes
, if your Internet service provider requires that a proxy server is used to connect to the Internet.
•
Host address:
 — Enter the proxy server address.
•
Port:
 — Enter the port number of the proxy server.
Restore default IAP
Your device contains predefined, default Internet access points that are generated automatically when a new SIM card is inserted
into your device for the first time. If you delete these access points, you can restore them with the 
Restore default IAP
 application.
To restore the predefined Internet access points, select 
Connections
 > 
Restore default IAP
, and press 
Yes
.
Security
Go to 
Desk
 > 
Tools
 > 
Control panel
 > 
Security
.
Device security
You can modify the security settings for the PIN code, automatic locking of the device, and changing of the SIM card. You can
also change the PIN code, PIN2 code, lock code, and barring password.
Avoid using codes that are similar to emergency numbers, such as 112, to prevent accidental dialling of the emergency number.
Codes are shown as asterisks. When changing a code, enter the current code, and then the new code twice.
Defining device lock settings
Important:  In offline profile you cannot make (or receive) any calls, or use other features that require GSM network
coverage. To make any calls, you must first activate the phone function by changing the profile. You may, however, be
able to make an emergency call in offline profile by pressing the power key on the cover of the device and then entering
the official emergency number. This can be done using the cover phone interface only, not the communicator interface.
If the device has been locked, enter the lock code to activate the phone function. When the device is locked, calls may
still be possible to the official emergency number.
Making an emergency call in offline profile or when the device is locked requires that the device recognizes the number
to be an official emergency number. It may be advisable to change the profile or unlock the device by entering the
lock code before you make the emergency call.
To define device lock settings, select 
Security
 > 
Device security
, and select the 
Device lock
 page.
Define the following:
•
Autolock period
 — You can set a time-out after which the device is automatically locked and can be used only if the correct
lock code is entered. When the device is locked, calls may still be possible to the official emergency number programmed
into your device. You can also answer incoming calls.
•
Lock code
 — Press 
Change
 to change the lock code. The new code must be 5 to 10 digits long. The preset code is 12345. To
avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from
your device.
•
Lock if SIM card is changed
 — You can set the device to ask for the lock code when an unknown SIM card is inserted into your
device. The device maintains a list of SIM cards that are recognized as the owner's cards.
•
Allow remote locking
 — If you set this option to 
Yes
, you can lock the device by sending a predefined text message from
another phone.
To create a remote locking message, select 
Security
 > 
Device security
. Set the option 
Allow remote locking
 to 
Yes
, enter your
lock code, and enter text for the remote locking message in the 
Message
 field. Confirm the message, and press 
Done
. The remote
locking message is case-sensitive and can be 5 to 20 characters or digits long. Press 
Reboot
 to restart the device and for the
changes to take effect.
C o n t r o l   p a n e l
Copyright © 2004-2005 Nokia. All Rights Reserved.
67
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108