Nokia 9500 Communicator

Page 70
background image
•
Password
 — A password may be needed to connect to the Internet, and is usually provided by the service provider. The
password is often case-sensitive.
4. After defining the settings, press 
Advanced
 to define advanced settings, if necessary. Otherwise, press 
Finish
 or 
Done
 to exit
the setup wizard.
Configuring advanced Internet access point settings
Press 
Advanced
 when you have finished setting up the basic Internet access point settings. The pages and options available
depend on the connection type you have selected.
IP configuration page
Note that the two protocols (IPv4 and IPv6) require slightly different settings.
•
Network type
 (for GPRS only) — For a GPRS connection you must specify which protocol you want to use.
•
Auto retrieve IP
 — If you select 
Yes
, the IP address is obtained automatically from the server. This setting is also called dynamic
IP address.
•
IP address
 — The IP address of the device. If the IP address is obtained automatically, you are not required to enter details here.
•
Auto retrieve DNS
 — If you select 
Yes
 for the IPv4 protocol, the DNS (domain name server) address is obtained automatically
from the server. The respective value for the IPv6 protocol is 
Well known
. DNS is an Internet service that translates domain
names such as www.nokia.com into IPv4 addresses like 192.100.124.195, or IPv6 addresses like
3ffe:2650:a640:1c2:341:c39:14. If you select 
No
 for the IPv4 protocol, or 
Manual
 for the IPv6 protocol, you must specify the
IP addresses for the primary and secondary DNS servers.
Proxies page
You may want to use a proxy to quicken access to the Internet. Some Internet service providers require the use of Web proxies.
Contact your Internet service provider to determine proxy details.
If you have made an Internet connection to your company’s intranet, and are unable to retrieve Web pages from the general
Internet, you may need to set up a proxy server to retrieve Web pages outside your company’s intranet.
Define the following:
•
Proxy protocol
 — Select the protocol type of the proxy. You can set different proxy settings for each protocol.
•
Use proxy server
 — Select 
Yes
 to use the proxy server.
•
Proxy server
 — Enter the IP address of the proxy server, or the domain name. Example domain names are: company.com and
organisation.org.
•
Port number
 — The number of the proxy port. The port number is related to the protocol. Common values are 8000 and 8080,
but vary with every proxy server.
•
No proxy for
 — Define the domains for which the HTTP or HTTPS proxy is not needed.
Data call page
Define the following:
•
Connection type
 — Define the GSM data call type. To use 
High speed
, the service provider must support this feature, and if
necessary, activate it for your SIM card.
•
Remote modem type
 — Define whether the device uses an analog or digital connection. This setting depends on both your
GSM network operator and Internet service provider, because some GSM networks do not support certain types of ISDN
connections. For details, contact your Internet service provider. If ISDN connections are available, they establish connections
more quickly than analog methods.
•
Modem speed
 — This option allows you to limit the maximum connection speed. Higher data rates may cost more, depending
on the service provider. The speed represents the maximum speed at which your connection will operate. During the
connection, the operating speed may be less, depending on network conditions.
•
Modem initialisation
 — You can control your device using modem AT commands. If required, enter characters specified by
your service provider.
Script page
A script can automate the connection between the device and the server. Contact your Internet service provider to find out
whether you need a script.
Define the following:
•
Use login script
 — If you select 
Yes
, you can write or import a login script. You can edit the script in the 
Login script
 field.
•
Show terminal window
 — If you select 
Yes
, once a connection is established, you see the execution of the script.
Other page
Define the following:
•
Use callback
 — Select 
Yes
 if you have a service that dials back to your device when you establish an Internet connection.
C o n t r o l   p a n e l
Copyright © 2004-2005 Nokia. All Rights Reserved.
70
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108