Nokia 9500 Communicator

Page 88
background image
Here are some starting points for troubleshooting:
• Printer - check that the printer is switched on and online, print a test page, try to print while directly connected to the printer,
verify that the printer works with other wireless devices, or check that the printer is supported by your device.
• Infrared - check that infrared is activated, the infrared ports of the device and the printer face each other, and there are no
bright lights shining on either port.
• Bluetooth - check that Bluetooth is activated and your device can locate Bluetooth devices other than the printer, and the
device and printer are within range.
• Wireless LAN - check that wireless LAN is activated and the wireless LAN settings are correct, the wireless printer is compatible
with your device, and verify other wireless LAN devices can find your wireless printer.
Managing mobile printing settings
To manage the printing settings when printing to a compatible Hewlett-Packard printer, go to 
Desk
 > 
Tools
 > 
Control
panel
 > 
Extras
 > 
HP printer selection
. Set the following:
•
Printer model
 — Select the printer you want to use.
•
Quality mode
 — Select the quality of the print, depending on the printing qualities supported by your printer. 
Normal
 is for
600 dpi printing, 
Draft
 is for fast, 300 dpi printing, 
Best
 is for 1200 dpi printing, and 
Maximum
 is for 2400/4800 dpi printing.
To save ink or to increase the speed of printing, select the 
Normal
 or 
Draft
.
•
Media type
 — Select the type of printing medium.
•
Colour mode
 — Select whether to print in color or greyscale, depending on your printer.
Remote configuration (network service)
The 
Device manager
 application helps you configure connection settings, for example, e-mail, multimedia messaging, or Internet
settings.
Go to 
Desk
 > 
Tools
 > 
Device manager
.
The remote configuration connection is usually started by the server when device settings need to be updated.
To start a configuration session, select a profile from the list, and press 
Connect
. If no remote configuration profiles have been
defined, you must first create a new profile.
To disable configuration, select a profile, press Menu, and select 
Tools
 > 
Disable configuration
. You cannot receive configuration
settings from any of the configuration servers for which you have a profile.
When the configuration session has ended, you can view status information.
To open the configuration log, select a profile, and press 
Configuration log
. The log file shows the latest configuration status of
the selected profile.
Creating a new configuration server profile
The configuration server profile contains the settings for the remote server. You can create several profiles if you need to access
multiple servers.
You may receive the configuration server profile settings as a special message from your service provider.
1. If you have no profiles defined, press 
New
, otherwise press Menu, and select 
File
 > 
New
.
2. If you already have profiles defined, choose whether you want to copy the values from an existing profile to be used as the
basis for the new profile.
3. The 
Profile settings
 dialog opens.
Define the following settings on the different pages of the dialog:
•
Server name
 — Type a name for the configuration server.
•
Server ID
 — Type the unique ID to identify the configuration server. Contact your service provider or system administrator
for the correct value.
•
Password
 — Write a password to identify your device to the server. Confirm the password.
•
Active
 — Select 
Yes
 to allow the server to initiate a configuration session.
•
Accepted
 — Select 
Yes
 if you do not want the server to ask for your confirmation when it initiates a configuration session.
•
Connection type
 — Select how you want to connect to the server.
•
Access point
 — Select the access point you want to use for the data connection to the server.
•
Host address
 — Type the URL address of the server. Contact your service provider or system administrator for the correct
value.
•
Port
 — Type the port number of the server. Contact your service provider or system administrator for the correct value.
•
User name
 — Enter your user ID for the configuration server. Contact your service provider or system administrator for
your correct user ID.
C o n n e c t i v i t y
Copyright © 2004-2005 Nokia. All Rights Reserved.
88
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108