Nokia 9500 Communicator

Page 85
background image
and Handsfree Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved
enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.
Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase
the demand on battery power and reduce the battery life.
Bluetooth technology enables cost-free wireless connections between electronic devices within a maximum range of 10 metres.
A Bluetooth connection can be used to send images, videos, texts, business cards, calendar notes, or to connect wirelessly to
devices using Bluetooth technology, such as computers.
Since devices using Bluetooth technology communicate using radio waves, your device and the other devices do not need to
be in direct line-of-sight. The two devices only need to be within a maximum of 10 metres of each other, although the connection
can be subject to interference from obstructions such as walls or from other electronic devices.
When you activate Bluetooth for the first time, you are asked to give a name to your device.
Bluetooth settings
To modify the Bluetooth settings, select 
Desk
 > 
Tools
 > 
Control panel
, and select 
Connections
 > 
Bluetooth
. Select the
Settings
 page.
Define the following:
•
Bluetooth active
 — Select 
Yes
 to enable Bluetooth. If you select 
No
, all active Bluetooth connections are ended, and Bluetooth
cannot be used for sending or receiving data.
•
My telephone's visibility
 — Select 
Shown to all
 if you want your device to be found by other Bluetooth devices. If you
select 
Hidden
, your device cannot be found by other devices.
•
My Bluetooth name
 — Define a name for your device. The maximum length of the name is 247 characters.
•
Remote SIM access
 — Select 
Enabled
 to allow communication between a compatible car kit and your Nokia 9500
If you have set Bluetooth as active and changed your visibility to 
Shown to all
, your device and its name can be seen by other
Bluetooth device users.
Tip:  To activate or deactivate Bluetooth, press Chr+  .
Note that if Bluetooth was turned off as a result of entering 
Offline
 profile, you must re-enable Bluetooth manually.
Sending data with Bluetooth
Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or
forwarded.
There can be only one active Bluetooth connection at a time.
1. Open an application where the item you want to send is stored. For example, to send a photo to another device, open the
Images
 application.
2. Select the item you want to send, press Menu, and select 
File
 > 
Send
 > 
Via Bluetooth
.
3. If you have searched for Bluetooth devices earlier, a list of the devices that were found previously is shown first. You can see
a device icon and the device name. To start a new search, press 
Search again
. To interrupt the search, press 
Stop
.
4. Select the device you want to connect with, and press 
Select
.
5. If the other device requires pairing before data can be transmitted, you are asked to enter a passcode. Create your own
passcode (1-16 characters long, numeric), and agree with the owner of the other Bluetooth device to use the same code.
The passcode is used only once, and you do not have to memorize it. Devices that do not have a user interface have a preset
passcode. After pairing, the device is saved to the 
Paired devices
 page.
6. When the connection has been established successfully, the note 
Sending...
 is shown.
Receiving data with Bluetooth
If you want to receive data using Bluetooth, set Bluetooth to be active and select the option 
Shown to all
.
When you receive data with Bluetooth from a device that is not authorized, you are first asked if you want to accept the Bluetooth
message. If you accept, the item is placed in the Inbox folder in the 
Messaging
 application.
Tip: If the received item is not in the Inbox folder, go to 
Desk
 > 
Office
 > 
File manager
, and view the contents of 
C:\My
files\
.
Pairing with a device
Pairing means authentication. Pairing with a device makes device searches quicker and easier.
C o n n e c t i v i t y
Copyright © 2004-2005 Nokia. All Rights Reserved.
85
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108